BioDrain Control

Grease & Waste Digester

Click Here to Enlarge Picture

BioDrain Control is a ready-to-use formula that incorporates a blend of biodegradable surfactants and odor counteractants with eight strains of non-pathogenic bacterial spores. Our exclusive blend of bioengineered bacteria has the ability to withstand hot temperatures (up to 200° F) and is resistant to chlorinated products, disinfectants, bleach and acidic or alkaline conditions.

BioDrain Control helps keep septic systems working properly and counteracts drain line odors when dispensed on a regular basis according to directions.

BioDrain Control is a natural alternative to caustics, acids or solvents and is designed to digest grease, fat, proteins, carbohydrates and soap scum.

Product Benefits Ready-to-use Biodegradable Neutralizes drain line cleaning Reduces grease trap pumping No caustics, acids, solvents or free enzymes Over 200 billion Colony Forming Units (CFU)/gallon Multi-strain formulation Resistant to hot water up to 200° F Improved low pH activity Highly effective in septic systems Safe for use in Marine and RV holding tanks

WHERE TO USE

BioDrain Control is specially designed for treatment and maintenance of drains and grease traps as well as augmentation of bacterial strains in septic tanks. Use BioDrain Control in wastewater treatment plants on organic waste solids such as screenings, grit, sludge and scum—removed during the wastewater treatment process—to counteract odors. BioDrain Control is acceptable under former USDA guidelines for use in inedible product processing areas, nonprocessing areas and exterior areas of official establishments operating under the Federal meat, poultry, shell egg grading and egg products inspection programs.

HOW TO APPLY

ORGANIC WASTE TREATMENT
Drain Lines: Pour 1.5-2 oz. per inch of pipe. Use product twice per week or as needed depending on system problem. Initial Treatment: Begin with the lowest floor and continue with one floor per day until top floor is reached. Then, use only from top floor.

Grease Traps: Pour 1-3 oz. per 100 gallons (13 cu. ft.) into a sink or drain line closest to trap. Use product daily. For best results, grease trap should be pumped out prior to starting treatment.

Septic Tanks: Flush 8 oz. per 500 gallons (55 cu. ft.) down toilet. Initial Treatment: Pour 32 oz. per 500 gallons (65 cu. ft.) to purge treatment.

ODOR COUNTERACTANT
Wastewater Treatment Plants: Using a sprayer, saturate waste solids. Apply as needed to counteract odors.

Holding Tank Treatment: Pour 2 - 4 oz. per 30 gallons tank capacity through toilet and sink drain. Flush into holding tank. Repeat after each dumping, and as required during heavier than normal loading.

Available Sizes

Item #	Packaging	Shipping Wt. (lbs.)			Cube Size (ft.³)
28002-Q12	12 x 1 Quart		28			0.93
28002-QP12	12 x 1 Quart w/proportioner		28			0.93
28002-5G	1 x 5 Gallon		45			1.35
28002-35G	1 x 35 Gallon		315			7.40
28002-55G	1 x 55 Gallon		485			11.40